Curriculum | Learning Activities |
---|---|
SCIENCE | Real world experimental design and data collection |
TECHNOLOGY | Use technology for diagnosis and/or analysis of materials |
ART | Record, document and publish a multi-media history of the project |
ENGINEERING | How to design and build a wind powered vehicle from (very simple to advanced). |
MATHEMATICS | Evaluation, prototyping and improvement guided by authentic data & improved understanding |
A STEAM activity where students investigate basic engineering concepts using sailing technology as a method of illustrating the application of those concepts. Inspired by 'Engineers Go Sailing' Stanford University
IF ALL ELSE FAILS: “I will admit that engineering is my weak area of STEM, but if I expect my students to be uncomfortable while learning, then so must I!” Darci J Harland
Sailing provides excellent examples of physics, including: Newton's laws, vector subtraction, Archimedes' principle and others.
Some of the questions that are important for sailors are:
We will use science (the physics of sailing), to answer and STEAM to better understand these and some other questions.
But first:
Generally speaking, sailing vessels employ two main types of rig: the square rig and the fore-and-aft rig.
Sails propel the boat in one of two ways:
Source: https://en.wikipedia.org/wiki/Sail#Sail_aerodynamics
WARNING: Most of the experiments below require some minor scissor cutting and/or making of holes
If case this is a practical or safety challenge for students then an adult can, in most cases, very quickly and easily prepare the materials in advance.
On the other hand, parents may wish to volunteer to help in the classroom.
Your teacher will give you a link to start and tell you how much time you have to complete this challenge.
Every 15 minutes, take a photograph or make a short video of your progress and make notes in your journal about what you did in the last 15 minutes.
Your teacher should NOT tell you what to do to make your turbine work.
If the questions do not help, you will need to figure out how to get help some other way.
A sample of wind power devices that can be built using very simple materials and requiring minimal skill.
There are plans and a short (one minute) video (see link at the bottom of each plan page) for each of the toys:
If a sailboat is stranded because there is no wind, is it possible to set up a fan on deck and blow wind into the sail to make the boat move?
This is a classic physics problem that you can explore by using simple materials to build a low-friction cart with a removable motor and sail. What’s Going On?
Here is a summary of the results to be expected for the investigations above:
The behavior of the cart is a classic example of Newton’s Third Law: For every action, there is an equal and opposite reaction and can also be used to demonstrate other aspects of force and motion. Source Exploratorium Science Snacks Fan Cart
For our sailing challenge, students will demonstrate that movement using sail-powered toy cars.
Example only: Student-built Wind-Driven Cars
Source: Wikipedia - Wind energy
A Video record of our experiments to test sailing methods using a wind powered a toy car:
The toy used in our experiments (above) was available in Australia in FEb 2016 for around $15 (including postage) from EBay Australia.
WARNING: The plastic parts may require some (minimal) cutting/trimming. To make sure you don't hurt yourself or break any pieces and waste your money, it's best to get an adult to help work with you and help you understand the plans and the way the bits fit together. There is another video on how to build the car here.
MODIFICATIONS: On the prototype, we removed the wind vane and replaced it with an elastic band so that the turbine/sails responded only to wind blown from the direction of the fan.
Full links to original plans and instructions on building the prototype model shown in this video are available on the Advanced Challenge wiki page
Can you find out whether they ended up breaking the world record?
When Building & Testing, remember To Always Use Scientific method:
Research around the world indicates that at the end of their schooling, large numbers of students still hold many ideas, or conceptions, which are not in accord with the way that scientists understand our world. Here are some guidelines for teaching science at school.
The scientific method is one particular way to ask and answer scientific questions by making observations and doing experiments. Some people argue that there is no such thing as 'The Scientific Method' - make up your own mind:
The steps of the scientific method are to:
No matter what your method is, it is important for your experiment to be a fair test:
A fair test means that you should set up your experiment so that everything is fair.
Here are lots of links to give you ideas and help you get started along your journey:
FIRSTLY, here's the answer to the sailing puzzle (above) and some more information about how sails work - Source: University of NSW
The sailing race puzzle (above):
Wind power is the conversion of wind energy into a some other useful form of energy such as using turbines to make electricity, windmills for mechanical power, wind pumps for water pumping or drainage.
Wind energy is the Kinetic energy associated with the movement of atmospheric air. It has been used for hundreds of years for sailing, grinding grain & for irrigation. With the right technology,the wind's kinetic energy can be captured and converted to other useful forms of energy such as electricity or mechanical power (See the most efficient design for a wind turbine & the best wind turbine blade design for catching a direct steady horizontal wind.)
The blades on a modern wind turbines use the same principles as the sails on a boat: A modern wind turbine is driven by one or more sails.
Some ideas to get you started - not to copy (you can do much better):
Students can build a scientific quality 'Sailing Test Lab' to measure, compare and improve their designs:
Some links to help assess good, better, best & most improved design: